Di-GPS Mini 3L Series Guia do Utilizador Página 10

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 14
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 9
di-GPS is a registered trademark or a trademark of Dawn Technology Limited
Nikon D2HS, D2X, D2XS, D200, D3, D3S, D3X, D300, D300S and D700 are registered trademark or a trademark of NIKON
CORPORATION in the United States and/or other countries.
Fujifilm and S5 Pro are registered trademark or a trademark of FUJIFILM U.S.A., Inc. in the United States and/or other countries.
V1.0
10
How to connect di-GPS Mini 3L series GPS receiver to PC
di-GPS Mini 3L series GPS receiver can be connected to any PC with a USB
port. USB cable is supplied for PC connection.
di-GPS Mini 3L series GPS receiver support Windows, Mac OSX. The Virtual
COM Port Drivers for different OS can be downloaded at the di-GPS support
page
http://www.di-gps.com/di-GPS/support.htm.
1. Disconnect di-GPS Mini 3L series GPS receiver from the camera.
2. Connect di-GPS Mini 3L series GPS receiver with the USB cable.
3. Connect USB cable to USB port of PC.
4. If the di-GPS Mini 3L series GPS receiver is properly connected, the
Green LED will start to flash, indicating the GPS receiver is searching for
a signal.
di-GPS Mini 3L series GPS receiver will automatically detect the connection of
the USB port. The power switch will be disabled when connected to PC. The
power switch only functions when connect to DSLR camera.
Glink Software is used for the data logger configuration. Please refer to Glink
user guide for log configuration and data download. Glink software and user
guide can be downloaded at http://www.di-gps.com/di-GPS/support.htm.
Note
Do not connect USB cable to PC and 10-pin cable to camera at the same time.
Vista de página 9
1 2 ... 5 6 7 8 9 10 11 12 13 14

Comentários a estes Manuais

Sem comentários